[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Biosynthetic selenium nanoparticles (Bio-SeNPs) mitigate the toxicity of antimony (Sb) in rice (Oryza sativa L.) by limiting Sb uptake, improving antioxidant defense system and regulating stress-related gene expression.

Nanotechnology offers a promising and innovative approach to mitigate biotic and abiotic stress in crop production. In this study, the beneficial role and potential detoxification mechanism of biogenic selenium nanoparticles (Bio-SeNPs) prepared from Psidium guajava extracts in alleviating antimony (Sb) toxicity in rice seedlings (Oryza sativa L.) were investigated. The results revealed that exogenous addition of Bio-SeNPs (0.05 g/L) into the hydroponic-cultured system led to a substantial enhancement in rice shoot height (73.3%), shoot fresh weight (38.7%) and dry weight (28.8%) under 50 µM Sb(III) stress conditions. Compared to Sb exposure alone, hydroponic application of Bio-SeNPs also greatly promoted rice photosynthesis, improved cell viability and membrane integrity, reduced reactive oxygen species (ROS) levels, and increased antioxidant activities. Meanwhile, exogenous Bio-SeNPs application significantly lowered the Sb accumulation in rice roots (77.1%) and shoots (35.1%), and reduced its root to shoot translocation (55.3%). Additionally, Bio-SeNPs addition were found to modulate the subcellular distribution of Sb and the expression of genes associated with Sb detoxification in rice, such as OsCuZnSOD2, OsCATA, OsGSH1, OsABCC1, and OsWAK11. Overall, our findings highlight the great potential of Bio-SeNPs as a promising alternative for reducing Sb accumulation in crop plants and boosting crop production under Sb stress conditions.

A novel magnetic graphene-loaded biochar gel for the remediation of arsenic- and antimony-contaminated mining soil.

Metalloid co-contamination such as arsenic (As) and antimony (Sb) in soils has posed a significant threat to ecological balance and human well-being. In this study, a novel magnetic graphene-loaded biochar gel (FeBG) was developed, and its remediation potential for the reclamation of AsSb spoiled soil was assessed through a six-month soil incubation experiment. Results showed that the incorporation of iron substances and graphene imparted FeBG with enhanced surface characteristics, such as the formation of a new FeO bond and an enlarged surface area compared to the pristine biochar (BC) (80.5 m2 g-1 vs 57.4 m2 g-1). Application of FeBG significantly decreased Na2HPO4-extractable concentration of As in soils by 9.9 %, whilst BC addition had a non-significant influence on As availability, compared to the control. Additionally, both BC (8.2 %) and FeBG (16.4 %) treatments decreased the Na2HPO4-extractable concentration of Sb in soils. The enhanced immobilization efficiency of FeBG for As/Sb could be attributed to FeBG-induced electrostatic attraction, complexation (Fe-O(H)-As/Sb), and π-π electron donor-acceptor coordination mechanisms. Additionally, the FeBG application boosted the activities of sucrase (9.6 %) and leucine aminopeptidase (7.7 %), compared to the control. PLS-PM analysis revealed a significant negative impact of soil physicochemical properties on the availability of As (ß = -0.611, P < 0.01) and Sb (ß = -0.848, P < 0.001) in soils, in which Sb availability subsequently led to a suppression in soil enzyme activities (ß = -0.514, P < 0.01). Overall, the novel FeBG could be a potential amendment for the simultaneous stabilization of As/Sb and the improvement of soil quality in contaminated soils.

Can Sb(III)-oxidizing prokaryote also oxidize As(III) under aerobic and anaerobic conditions, and vice versa?

Sb(III) and As(III) share similar chemical features and coexist in the environment. However, their oxidase enzymes have completely different sequences and structures. This raises an intriguing question: Could Sb(III)-oxidizing prokaryotes (SOPs) also oxidize As(III), and vice versa? Regarding this issue, previous investigations have yielded unclear, incorrect and even conflicting data. This work aims to address this matter. First, we prepared an enriched population of SOPs that comprises 55 different AnoA genes, lacking AioAB and ArxAB genes. We found that these SOPs can oxidize both Sb(III) and As(III) with comparable capabilities. To further confirm this finding, we isolated three cultivable SOP strains that have AnoA gene, but lack AioAB and ArxAB genes. We observed that they also oxidize both Sb(III) and As(III) under both anaerobic and aerobic conditions. Secondly, we obtained an enriched population of As(III)-oxidizing prokaryotes (AOPs) from As-contaminated soils, which comprises 69 different AioA genes, lacking AnoA gene. We observed that the AOP population has significant As(III)-oxidizing activities, but lack detectable Sb(III)-oxidizing activities under both aerobic and anaerobic conditions. Therefore, we convincingly show that SOPs can oxidize As(III), but AOPs cannot oxidize Sb(III). These findings clarify the previous ambiguities, confusion, errors or contradictions regarding how SOPs and AOPs oxidize each other's substrate.

Enhanced Sb(V) removal of sulfate-rich wastewater by anaerobic granular sludge assisted with Fe/C amendment.

Antimony (Sb) and sulfate are two common pollutants in Sb mine drainage and Sb-containing textile wastewater. In this paper, it was found that iron­carbon (Fe/C) enhanced Sb(V) removal from sulfate-rich wastewater by anaerobic granular sludge (AnGS). Sulfate inhibited Sb(V) removal (S + Sb, k = 0.101), while Fe/C alleviated the inhibition and increased Sb(V) removal rate by 2.3 times (Fe/C + S + Sb, k = 0.236). Fe/C could promote the removal of Sb(III), and Sb(III) content decreased significantly after 8 h. Meanwhile, Fe/C enhanced the removal of sulfate. The 3D-EEM spectrum of supernatant in Fe/C + S + Sb group (at 24 h) showed that Fe/C stimulated the production of soluble microbial products (SMP) in wastewater. SMP alleviated the inhibition of sulfate, promoting AnGS to reduce Sb(V). Sb(V) could be reduced to Sb(III) both by AnGS and sulfides produced from sulfate reduction. Further analysis of extracellular polymeric substances (EPS) and AnGS showed that Fe/C increased the adsorbed Sb(V) in EPS and the c-type cytochrome content in AnGS, which may be beneficial for Sb(V) removal. Sb(V) reduction in Fe/C + S + Sb group may be related to the genus Acinetobacter, while in Sb group, several bacteria may be involved in Sb(V) reduction, such as Acinetobacter, Pseudomonas and Corynebacterium. This study provided insights into Fe/C-enhanced Sb(V) removal from sulfate-rich wastewater.

Risk assessment of antimony-arsenic contaminated soil remediated using zero-valent iron at different pH values combined with freeze-thaw cycles.

Soil in mining wastelands is seriously polluted with heavy metals. Zero-valent iron (ZVI) is widely used for remediation of heavy metal-polluted soil because of its excellent adsorption properties; however, the remediation process is affected by complex environmental conditions, such as acid rain and freeze-thaw cycles. In this study, the effects of different pH values and freeze-thaw cycles on remediation of antimony (Sb)- and arsenic (As)-contaminated soil by ZVI were investigated in laboratory simulation experiments. The stability and potential human health risks associated with the remediated soil were evaluated. The results showed that ZVI has a significant stabilizing effect on Sb and As in both acidic and alkaline soils contaminated with dual levels of Sb and As, and the freeze-thaw process in different pH value solution systems further enhances the ability of ZVI to stabilize Sb and As, especially in acidic soils. However, it should be noted that apart from the pH=1.0 solution environment, ZVI's ability to stabilize As is attenuated under other circumstances, potentially leading to leaching of its unstable form and thereby increasing contamination risks. This indicates that the F1 (2% ZVI+pH=1 solution+freeze-thaw cycle) processing exhibits superior effectiveness. After F1 treatment, the bioavailability of Sb and As in both soils also significantly decreased during the gastric and intestinal stages (about 60.00%), the non-carcinogenic and carcinogenic risks of Sb and As in alkaline soils are eliminated for children and adults, with a decrease ranging from 60.00% to 70.00%, while in acidic soil, the non-carcinogenic and carcinogenic risks of As to adults and children is acceptable, but Sb still poses non-carcinogenic risks to children, despite reductions of about 65.00%. These findings demonstrate that soil pH is a crucial factor influencing the efficacy of ZVI in stabilizing Sb and As contaminants during freeze-thaw cycles. This provides a solid theoretical foundation for utilizing ZVI in the remediation of Sb- and As-contaminated soils, emphasizing the significance of considering both pH levels and freeze-thaw conditions to ensure effective and safe treatment.

Interactions of monolayer molybdenum disulfide sheets with metalloid antimony in aquatic environment: Adsorption, transformation, and joint toxicity.

The tremendous application potentiality of transitional metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) nanosheets, will unavoidably lead to increasing release into the environment, which could influence the fate and toxicity of co-existed contaminants. The present study discovered that 59.8 % of trivalent antimony [Sb(III)] was transformed by MoS2 to pentavalent Sb [Sb(V)] in aqueous solutions under light illumination, which was due to hole oxidation on the nanosheet surfaces. A synergistic toxicity between MoS2 and Sb(III, V) to algae (Chlorella vulgaris) was observed, as demonstrated by the lower median-effect concentrations of MoS2 + Sb(III)/Sb(V) (13.1 and 20.9 mg/L, respectively) than Sb(III)/Sb(V) (38.8 and 92.5 mg/L, respectively) alone. Particularly, MoS2 at noncytotoxic doses notably increased the bioaccumulation of Sb(III, V) in algae, causing aggravated oxidative damage, photosynthetic inhibition, and structural alterations. Metabolomics indicated that oxidative stress and membrane permeabilization were primarily associated with down-regulated amino acids involved in glutathione biosynthesis and unsaturated fatty acids. MoS2 co-exposure remarkably decreased the levels of thiol antidotes (glutathione and phytochelatins) and aggravated the inhibition on energy metabolism and ATP synthesis, compromising the Sb(III, V) detoxification and efflux. Additionally, extracellular P was captured by the nanosheets, also contributing to the uptake of Sb(V). Our findings emphasized the nonignorability of TMDs even at environmental levels in affecting the ecological hazard of metalloids, providing insight into comprehensive safety assessment of TMDs.

The composition and differences of antimony isotopic in sediments affected by the world's largest antimony deposit zone.

Antimony (Sb) isotopic fingerprinting is a novel technique for stable metal isotope analysis, but the use of this technique is still limited, especially in sediments. In this study, the world's most important Sb mineralization belt (the Xikuangshan mineralization belt) was taken as the research object and the Sb isotopic composition and Sb enrichment characteristics in the sediments of water systems from different Sb mining areas located in the Zijiang River (ZR) Basin were systematically studied. The results showed that the ε123Sb values in the sediments of the ZR and its tributaries, such as those near the Longshan Sb-Au mine, the Xikuangshan Sb mine, and the Zhazixi Sb mine, were 0.50‒3.13 ε, 2.31‒3.99 ε, 3.12‒5.63 ε and 1.14‒2.91 ε, respectively, and there were obvious changes in Sb isotopic composition. Antimony was mainly enriched in the sediments due to anthropogenic sources. Dilution of Sb along the river and adsorption of Sb to Al-Fe oxides in the sediment did not lead to obvious Sb isotopic fractionation in the sediment, indicating that the Sb isotopic signature was conserved during transport along the river. The Sb isotopic signatures measured in mine-affected streams may have differed from those in the original Sb ore, and further investigation of Sb isotopic fingerprints from other possible sources and unknown geochemical processes is needed. This study reveals that the apparent differences in ε123Sb values across regions make Sb isotopic analysis a potentially suitable tool for tracing Sb sources and biogeochemical processes in the environment.

Arsenic, cadmium, lead, antimony bioaccessibility and relative bioavailability in legacy gold mining waste.

Bioaccessibility and relative bioavailability of As, Cd, Pb and Sb was investigated in 30 legacy gold mining wastes (calcine sands, grey battery sands, tailings) from Victorian goldfields (Australia). Pseudo-total As concentration in 29 samples was 1.45-148-fold higher than the residential soil guidance value (100 mg/kg) while Cd and Pb concentrations in calcine sands were up to 2.4-fold and 30.1-fold higher than the corresponding guidance value (Cd: 20 mg/kg and Pb: 300 mg/kg). Five calcine sands exhibited elevated Sb (31.9-5983 mg/kg), although an Australian soil guidance value is currently unavailable. Arsenic bioaccessibility (n = 30) and relative bioavailability (RBA; n = 8) ranged from 6.10-77.6% and 10.3-52.9% respectively. Samples containing > 50% arsenopyrite/scorodite showed low As bioaccessibility (<20.0%) and RBA (<15.0%). Co-contaminant RBA was assessed in 4 calcine sands; Pb RBA ranged from 73.7-119% with high Pb RBA associated with organic and mineral sorbed Pb and, lower Pb RBA observed in samples containing plumbojarosite. In contrast, Cd RBA ranged from 55.0-67.0%, while Sb RBA was < 5%. This study highlights the importance of using multiple lines of evidence during exposure assessment and provides valuable baseline data for co-contaminants associated with legacy gold mining activities.

Formation of Sb2O3 microcrystals by Rhodotorula mucilaginosa.

Antimony (Sb) pollution seriously endangers ecological environment and human health. Microbial induced mineralization can effectively convert metal ions into more stable and less soluble crystalline minerals by extracellular polymeric substance (EPS). In this study, an efficient Sb-resistant Rhodotorula mucilaginosa (R. mucilaginosa) was screened, which can resist 41 mM Sb(III) and directly transform Sb(III) into Sb2O3 microcrystals by EPS. The removal efficiency of R. mucilaginosa for 22 mM Sb(III) reached 70% by converting Sb(III) to Sb2O3. The components of supernatants as well as the effects of supernatants and pH on Sb(III) mineralization verified that inducible and non-inducible extracellular protein/polysaccharide biomacromolecules play important roles in the morphologies and sizes control of Sb2O3 formed by R. mucilaginosa respectively. Sb2O3 microcrystals with different morphologies and sizes can be prepared by the regulation of inducible and non-inducible extracellular biomacromolecules secreted by R. mucilaginosa. This is the first time to identify that R. mucilaginosa can remove Sb(III) by transforming Sb(III) into Sb2O3 microcrystals under the control of EPS. This study contributes to our understanding for Sb(III) biomineralization mechanisms and provides strategies for the remediation of Sb-contaminated environment.

Selenium increases antimony uptake in ramie (Boehmeria nivea L.) by enhancing the physiological, antioxidative, and ionomic mechanisms.

Ramie (Boehmeria nivea L.) is a promising phytoremediation candidate due to its high tolerance and enrichment capacity for antimony (Sb). However, challenges arise as Sb accumulated mainly in roots, complicating soil extraction. Under severe Sb contamination, the growth of ramie may be inhibited. Strategies are needed to enhance Sb accumulation in ramie's aboveground parts and improve tolerance to Sb stress. Considering the beneficial effects of selenium (Se) on plant growth and enhancing resistance to abiotic stresses, this study aimed to investigate the potential use of Se in enhancing Sb uptake by ramie. We investigated the effects of Se (0.5, 1, 2, 5, or 10 µM) on ramie growth, Sb uptake and speciation, antioxidant responses, and ionomic profiling in ramie under 10 mg/L of SbIII or antimonate (SbV) stresses. Results revealed that the addition of 0.5 µM Se significantly increased shoot biomass by 75.73% under SbIII stress but showed minimal effects on shoot and root length in both SbIII and SbV treatments. Under SbIII stress, 2 µM Se significantly enhanced Sb concentrations by 48.42% in roots and 62.88% in leaves. In the case of SbV exposure, 10 µM Se increased Sb content in roots by 42.57%, and 1 µM Se led to a 91.74% increase in leaves. The speciation analysis suggested that Se promoted the oxidation of SbIII to less toxic SbV to mitigate Sb toxicity. Additionally, Se addition effectively minimized the excess reactive oxygen species produced by Sb exposure, with the lowest malondialdehyde (MDA) content at 0.5 µM Se under SbIII and 2 µM Se under SbV, by activating antioxidant enzymes including superoxide dismutase, catalase, peroxidase, and glutathione peroxidase. Ionomic analysis revealed that Se helped in maintaining the homeostasis of certain nutrient elements, including magnesium, potassium (K), calcium (Ca), iron (Fe), and copper (Cu) in the SbIII-treated roots and K and manganese (Mg) in the SbV-treated roots. The results suggest that low concentrations of Se can be employed to enhance the phytoremediation of Sb-contaminated soils using ramie.

Comprehensive insight into mercury contamination in atmospheric, terrestrial and aquatic ecosystems surrounding a typical antimony-coal mining district.

This study comprehensively investigated mercury (Hg) contents of various environmental compartments in a typical antimony-coal mining area with intensive industrial activities over the past 120 years to analyze Hg environmental behaviors and evaluate Hg risks. The total mercury (THg) contents in river water, sediments, soils, PM10, dust falls, vegetables and corns were 1.16 ± 0.63 µg/L, 2.01 ± 1.64 mg/kg, 1.87 ± 3.88 mg/kg, 7.87 ± 18.68 ng/m3, 13.01 ± 14.53 mg/kg, 0.30 ± 0.34 mg/kg and 3.11 ± 0.51 µg/kg, respectively. The δ202Hg values in soils and dust falls were - 1.58 ∼ 0.12‰ and 0.25 ∼ 0.30‰, respectively. Environmental samples affected by industrial activities in the Xikuangshan (XKS) presented higher THg and δ202Hg values. Binary mixing model proved that atmospheric deposition with considerable Hg deposition flux (0.44 ∼ 6.40, 3.12 ± 2.20 mg/m2/y) in the XKS significantly contributed to Hg accumulations on surface soils. Compared with soils, sediments with more frequent paths and higher burst probabilities presented higher dynamic Hg risks. Children were faced higher health risk of multiple Hg exposure than adults. Furthermore, the health risk of THg by consuming leaf vegetables deserved more attention. These findings provided scientific basis for managing Hg contamination.

The role of an Sb-oxidizing bacterium in modulating antimony speciation and iron plaque formation to reduce the accumulation and toxicity of Sb in rice (Oryza sativa L.).

Microbial antimony (Sb) oxidation in the root rhizosphere and the formation of iron plaque (IP) on the root surface are considered as two separate strategies to mitigate Sb(III) phytotoxicity. Here, the effect of an Sb-oxidizing bacterium Bacillus sp. S3 on IP characteristics of rice exposed to Sb(III) and its alleviating effects on plant growth were investigated. The results revealed that Fe(II) supply promoted IP formation under Sb(III) stress. However, the formed IP facilitated rather than hindered the uptake of Sb by rice roots. In contrast, the combined application of Fe(II) and Bacillus sp. S3 effectively alleviated Sb(III) toxicity in rice, resulting in improved rice growth and photosynthesis, reduced oxidative stress levels, enhanced antioxidant systems, and restricted Sb uptake and translocation. Despite the ability of Bacillus sp. S3 to oxidize Fe(II), bacterial inoculation inhibited the formation of IP, resulting in a reduction in Sb absorption on IP and uptake into the roots. Additionally, the bacterial inoculum enhanced the transformation of Sb(III) to less toxic Sb(V) in the culture solution, further influencing the adsorption of Sb onto IP. These findings highlight the potential of combining microbial Sb oxidation and IP as an effective strategy for minimizing Sb toxicity in sustainable rice production systems.

Deep resource utilization of hazardous arsenic-alkali slag: Thermodynamic analysis, mechanism investigation and process optimization.

The best solution to address environmental pollution caused by arsenic-containing hazardous waste is to prepare high-purity elemental arsenic from such waste. The key to this approach lies in the efficient separation of arsenic from various impurities. This paper presents a viable solution for producing high-purity elemental arsenic from arsenic-alkali slag, and the keylies in utilizing the selective precipitation of magnesium ammonium arsenate (MgNH4AsO4) to achieve efficient separation of arsenic from alkali, antimony, and other impurities. Thermodynamic analysis and hydrometallurgical condition experiments indicate that in complex alkaline arsenic-containing solutions, over 90% of arsenic components can selectively precipitate in the form of MgNH4AsO4. The content of arsenic in the resulting precipitate reaches approximately 30%, while the content of antimony is below 0.1%. This achieves efficient enrichment of arsenic and preliminary separation of impurities in complex arsenic-alkali slag. Thermodynamic analysis and pyrometallurgical condition experiments demonstrate that the precipitate of MgNH4AsO4 can be reduced to elemental arsenic with an arsenic content reaching 99.85%, and an antimony content as low as 0.05%. This achieves a profound separation of arsenic from impurities. Based on the research presented in this paper, a production line was established that enables the deep resource utilization of arsenic-alkali slag.

Clinical and laboratory characterization of cutaneous leishmaniasis in Chinese migrant workers returned from Iraq.

BACKGROUND: Imported cutaneous leishmaniasis (CL) is a growing problem with increasing global travel to endemic areas. Returned travelers with CL are easy to be misdiagnosed and mistreated due to the lack of awareness for the disease to the physicians in non-endemic region that may lead to unfavorable outcome. Our study intends to summarize the characteristics of Leishmania infection imported from Iraq, so as to help Chinese physicians diagnose and treat the disease. All CL patients were treated with intralesional injection of antimony. METHODS: The definitive diagnosis of CL is based on the parasite identification by microscopic examination directly on lesion smear or parasite culture, PCR amplification of Leishmania-specific internal transcribed spacer 1 (ITS-1). The phylogenetic analysis, the immunopathological examination and the cytokine detection were proceeded after the diagnosis. RESULTS: We have identified 25 CL cases in migrant Chinese workers returned from Iraq for the first time with L. major as the major species of infected Leishmania parasite. Clinical features of the Iraq-imported CL include the history of skin exposure to sandflies bite and the lesions mostly on the exposed limbs. More ulcerative wet lesion was observed than nodular dry lesion. PCR is not only used to detect Leishmania parasite with high sensitivity, but also to identify the species of infected parasite through sequencing the amplified Leishmania-specific ITS-1 gene. The phylogenetic analysis based on the amplified ITS-1 sequences revealed that the infected Leishmania was closed related to the species and strains endemic in Iraq. The immunopathological examination revealed the T-cell filtrated cellular immune response with less B cells and NK cells involved. The cytokine profile measured in the skin lesion also confirmed the Th1 cellular response with higher expression levels of IFN-γ, IL-6 and IL-8. The skin lesions in CL patients were healed after being treated locally with antimony. CONCLUSIONS: The clinical and parasitological features of these Chinese CL cases imported from Iraq provide useful information for the diagnosis and treatment of CL that is not commonly seen in Chinese local population.

Phylogenetic analysis and antimony resistance of Leishmania major isolated from humans and rodents.

Cutaneous Leishmaniasis (CL) is one of the world's neglected diseases which is caused by Leishmania spp. The aim of this study was to assess molecular profile and antimony resistance of Leishmania isolated from human and rodent hosts. Samples were collected from suspected CL patients referred to health centres and wild rodent's traps in Gonbad-e-Qabus region, north-eastern Iran. Smears were subjected to PCR-RFLP to identify Leishmania species. In addition, ITS1-PCR products were sequenced for phylogenetic analysis. Clinical isolates and rodent samples were subjected to MTT assay to determine IC50 values and in vitro susceptibilities. Expression levels of antimony resistance-related genes were determined in CL isolates. Out of 1,949 suspected patients with CL and 148 rodents, 1,704 (87.4%) and 6 (4.05%) were positive with direct smear, respectively. Digestion patterns of BusRI (HaeIII) endonuclease enzyme were similar to what expected for Leishmania major. Phylogenetic analysis revealed that the highest interspecies similarity was found between current L. major sequences with L. major obtained from Russia and Uzbekistan. Out of 20 L. major samples tested, 13 (65%) were resistant to meglumine antimoniate (MA) treatment, with an activity index (AI) exceeding 4. The remaining 7 samples (35%) responded to MA treatment and were classified as sensitive isolates, with a confirmed sensitive phenotype based on their AI values. The comparison expression analysis of three major antimony resistance-associated genes in unresponsive clinical isolates demonstrated significant fold changes for TDR1 (4.78-fold), AQP1 (1.3-fold), and γ-GCS (1.17-fold) genes (P < 0.05). Herein, we demonstrate genetic diversity and antimony resistance of L. major isolated from human and reservoir hosts in north-eastern Iran, which could be the basis for planning future control strategies.

Synergistic catalysis of TiO2/WO3 photoanode and Sb-SnO2 electrode with highly efficient ClO• generation for urine treatment.

Urine is the major source of nitrogen pollutants in domestic sewage and is a neglected source of H2. Although ClO• is used to overcome the poor selectivity and slow kinetics of urea decomposition, the generation of ClO• suffers from the inefficient formation reaction of HO• and reactive chlorine species (RCS). In this study, a synergistic catalytic method based on TiO2/WO3 photoanode and Sb-SnO2 electrode efficiently producing ClO• is proposed for urine treatment. The critical design is that TiO2/WO3 photoanode and Sb-SnO2 electrode that generate HO• and RCS, respectively, are assembled in a confined space through face-to-face (TiO2/WO3//Sb-SnO2), which effectively strengthens the direct reaction of HO• and RCS. Furthermore, a Si solar panel as rear photovoltaic cell (Si PVC) is placed behind TiO2/WO3//Sb-SnO2 to fully use sunlight and provide the driving force of charge separation. The composite photoanode (TiO2/WO3//Sb-SnO2 @Si PVC) has a ClO• generation rate of 260% compared with the back-to-bake assembly way. In addition, the electrons transfer to the NiFe LDH@Cu NWs/CF cathode for rapid H2 production by the constructed photoelectric catalytic (PEC) cell without applied external biasing potential, in which the H2 production yield reaches 84.55 µmol h-1 with 25% improvement of the urine denitrification rate. The superior performance and long-term stability of PEC cell provide an effective and promising method for denitrification and H2 generation.

Pristine and Fe-functionalized biochar for the simultaneous immobilization of arsenic and antimony in a contaminated mining soil.

This study examined the effectiveness of pristine biochar (BC) and Fe-functionalized biochar (FBC) in remediating As-Sb co-contaminated soil, and revealed the resulting impact on soil enzymatic activities and bacterial communities. Results from incubation experiments showed that the 1.5% FBC treatment reduced the bioavailable As and Sb concentration by 13.5% and 27.1%, respectively, in compared to the control, and reduced the proportion of specifically adsorbed and amorphous Fe-Mn oxide-bound metal(loid) fractions in the treated soil. Among the BC treatments, only the 1.5% BC treatment resulted in a reduction of bioavailable As by 11.7% and Sb by 21.4%. The 0.5% BC treatment showed no significant difference. The FBC achieved high As/Sb immobilization efficiency through Fe-induced electrostatic attraction, π-π electron donor-acceptor coordination, and complexation (Fe-O(H)-As/Sb) mechanisms. Additionally, the 1.5% FBC treatment led to a 108.2% and 367.4% increase in the activities of N-acetyl-ß-glucosaminidase and urease in soils, respectively, compared to the control. Furthermore, it significantly increased the abundance of Proteobacteria (15.2%), Actinobacteriota (37.0%), Chloroflexi (21.4%), and Gemmatimonadota (43.6%) at the phylum level. Co-occurrence network analysis showed that FBC was better than BC in increasing the complexity of bacterial communities. Partial least squares path modeling further indicated that the addition of biochar treatments can affect soil enzyme activities by altering soil bacterial composition. This study suggests that FBC application offers advantages in simultaneous As and Sb immobilization and restructuring the bacterial community composition in metal(loid)-contaminated soil.

Chromoproduct approach to achieve environmentally sound management of e-waste plastics: Colombian project case.

Research to prevent releases of brominated flame retardants listed as persistent organic pollutants by the Stockholm Convention (POP-BFRs) was conducted through an international cooperation project in Colombia. Six waste electrical and electronic equipment (WEEE) management facilities implemented: 1) sorting e-waste by product type and color (black, white, and other; henceforth called chromoproducts), 2) sampling test products and their plastic fraction (called sets, separated by polymer type), 3) monitoring mass, bromine and antimony contents by hand-held X-ray fluorescence (XRF) and POP-BFRs such as polybrominated diphenyl ethers (PBDEs) by gas chromatography and mass spectrometry (GC-MS), and 4) differentiated treatment according to categories that used the Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (RoHS) hazardousness threshold of 1000 mg ∑PBDEs/kg. This scheme led to the proposal of a methodology for WEEE management called the "chromoproduct approach". 994,230 products were managed and grouped into 222 chromoproducts, from which 77 were analyzed: 50 below RoHS hazardousness (BRH), 16 above RoHS hazardousness (ARH), and 11 unknown RoHS hazardousness (URH). XRF indicators using bromine and antimony contents could rule out pollution in BRH chromoproducts; however, categorization still required GC-MS. One ARH plastics sample had 3620 mg ∑PBDEs/kg, while no POP-BFRs were found in the BRH plastics sample. The implementation of the chromoproduct approach traced 153.6 tonnes of ARH plastics. BRH plastics composition was estimated and used in a pilot-scale closed-loop economic activity. The chromoproduct approach seems promising for avoiding POP-BFR releases and promoting the upcycling of recyclable e-waste plastics.

[Foreign Medicine "Angdi Moniu" in Qing Dynasty Court].

There is a kind of historical relics called "Angdi moniu" in the Palace Museum, which looks like metal and appears frequently in the archives of the Qing Dynasty as a foreign medicine.It is stated that it can treat sores and pus in the HanXiu CaoTang Biji and it was also found in the archives of the Palace Office. However, no researcher in the academic community has yet conducted an in-depth research of what exactly is it. Through the investigation of cultural relics, in-depth research of Chinese and foreign literature, and the use of linguistic methods, this paper examines "Angdi Moniu" and its related items, and clarifies that "Angdi Moniu" is antimony, related items are antimonials and antimony cup.